oldfriend
Moderator
mình mới test lại bản mới nhất trên Chplay, chạy boba dùng mxplayer (bản miễn phí trên chplay luôn) passthrough tốt.
<Android 7 Nougat> Himedia Q10 pro - Tổng hợp các vấn đề liên quan
- Bắt đầu oldfriend
- Ngày bắt đầu
mình mới test lại bản mới nhất trên Chplay, chạy boba dùng mxplayer (bản miễn phí trên chplay luôn) passthrough tốt.
Em cũng mới tìm đc cách setting pass tốt bác ạ. Bản bobatv mới nhất; mxplayer free setup như sau:
- Bobatv vào cài đặt tick vào luôn sử dụng mxplayer để xem
- Mở mxplayer lên vào thiết lập/bộ giải mã/tick vào 4 mục: Dùng bộ giải mã HW+; Dùng bộ giải mã HW; Tinh chỉnh tỷ lệ và Âm thanh HW có thể chọn, còn lại để trống
dangthanhthe
Well-Known Member
Bác nào cài KODI 17.1 rồi cho nhận xét với. Cho em xin cái link down luôn. Thanks
Ngô hùng anh
New Member
kodi 17 chạy ngon trên Q10pro ko các bác nhỉ e mua bên bán cài bản 16.1 e thấy giao diện ko đẹp lắm muốn lên 17 kb chạy ngon ko
kodiitvplus
Well-Known Member
Trong ITVPLUS mục FSHARE > Cộng đồng chia sẻ có nhiều 4K a nhé. Tuy nhiên để xem được những nội dung này mạng anh phải cao. Mạng bên em 25mb không xem nổi, vừa xem vừa nghỉ đẩy xe bò
kodiitvplus
Well-Known Member
17 cho hình ảnh đẹp nhưng hoạt động chưa thực sự smooth. Một số addon gặp tình trạng failed mặc dù trên kodi 16 ok. Nếu anh muốn có giao diện của kodi 17 trên bản 16 thì cũng có đấy
xuanloi_design
Active Member
Có bác nào fix được Duplicated HDD trên Kodi 16.1 chưa (futeko có bản Patch nhưng chưa triệt để giống Kodi 17), bực mình mỗi vụ này mà chưa xử lý được.
Vietmediaf. Mục chia sẻ.
lam6630
Well-Known Member
BETA android 7 .V.2.0.3 cho riêng Q10 PRO (51. to 7 và 7 to 7)
It is the end of the month, so here is an update.
We have a test 2.0.3 firmware for Q10 Pro which is going to require some more work before becoming an official release.
If you are interested links are below.
ONLY INSTALL THIS FIRMWARE IF YOU KNOW WHAT YOU'RE DOING. IT SHOULD BE POSSIBLE TO RECOVER FROM ANY BRICKAGE, BUT IT MIGHT REQUIRE DISASSEMBLY OF THE Q10 PRO TO FORCE RECOVERY.
All feedback appreciated. It will get sent to HiMedia.
The firmware doesn't fix some key bugs. It also has a problem with Imprex, so Imprex has been disabled intentionally.
Changelog (direct from HiMedia - no corrections):
1: Fixed the issue of occasional failure while powering off;
2: Fixed the issue of occasional blurred-screen in Wallposter;
3: Fixed the issue of not displaying full screen while playing online videos;
4: Fixed the issue of occasional blank screen while playing local videos;
5: Fixed the issue of reporting video error while playing local videos;
6: Optimized system compatibility with different APKs;
7: Optimized WI-FI stability;
8: Added more output resolution modes;
9: Supported Wallposter for local videos;
10: Supported the Airplay on iOS 10.3;
11: Updated the latest Hisilicon SDK, presenting a more stable system and better display;
12: Updated Media Center, presenting smoother interface operation;
13: Updated APKs such as Homepage, Application Manager, etc., providing a better operated system.
USE RESTORE BUTTON INSTALL ONLY
THIS FIRMWARE IS FOR Q10 PRO ONLY
2.0.3 Q10 Pro firmware if you are running Android 7 (fw 2.0.0 or 2.0.1): http://www.mediafire.com/file/6je3o1gtr1gelpg/update.zip
2.0.3 Q10 Pro firmware if you are running Android 5.1 (fw 1.1.0 and earlier): http://www.mediafire.com/file/9d7vy8inziah5lg/update.zip
It is the end of the month, so here is an update.
We have a test 2.0.3 firmware for Q10 Pro which is going to require some more work before becoming an official release.
If you are interested links are below.
ONLY INSTALL THIS FIRMWARE IF YOU KNOW WHAT YOU'RE DOING. IT SHOULD BE POSSIBLE TO RECOVER FROM ANY BRICKAGE, BUT IT MIGHT REQUIRE DISASSEMBLY OF THE Q10 PRO TO FORCE RECOVERY.
All feedback appreciated. It will get sent to HiMedia.
The firmware doesn't fix some key bugs. It also has a problem with Imprex, so Imprex has been disabled intentionally.
Changelog (direct from HiMedia - no corrections):
1: Fixed the issue of occasional failure while powering off;
2: Fixed the issue of occasional blurred-screen in Wallposter;
3: Fixed the issue of not displaying full screen while playing online videos;
4: Fixed the issue of occasional blank screen while playing local videos;
5: Fixed the issue of reporting video error while playing local videos;
6: Optimized system compatibility with different APKs;
7: Optimized WI-FI stability;
8: Added more output resolution modes;
9: Supported Wallposter for local videos;
10: Supported the Airplay on iOS 10.3;
11: Updated the latest Hisilicon SDK, presenting a more stable system and better display;
12: Updated Media Center, presenting smoother interface operation;
13: Updated APKs such as Homepage, Application Manager, etc., providing a better operated system.
USE RESTORE BUTTON INSTALL ONLY
THIS FIRMWARE IS FOR Q10 PRO ONLY
2.0.3 Q10 Pro firmware if you are running Android 7 (fw 2.0.0 or 2.0.1): http://www.mediafire.com/file/6je3o1gtr1gelpg/update.zip
2.0.3 Q10 Pro firmware if you are running Android 5.1 (fw 1.1.0 and earlier): http://www.mediafire.com/file/9d7vy8inziah5lg/update.zip
Chỉnh sửa lần cuối:
Transit266
Active Member
Bản 2.0.3 chưa chính thức đâu. Cảnh báo có thể bị brick từ Futeko đấy
Đã Up lên rồi và thấy chạy vẫn ok
lam6630
Well-Known Member
phải úp đúng phiên bản . nếu sai ông này cắm bà kia thì thôi rồi.Đã Up lên rồi và thấy chạy vẫn ok
Ngô hùng anh
New Member
bác cho e hỏi tính năng airplay nó ở chỗ nào e tìm ko thấy nhỉ
lam6630
Well-Known Member
happycast hổ trợ airplay ios10.3
vanninhthuan119
Well-Known Member
Vài hôm vào thấy nhiều FW quá
oldfriend
Moderator
có cái patch tắt thanh navi chưa thấy ai post nên up lên, dành cho ai khó chịu với cái thanh đó.
Copy nguyên gốc:
Strip navigation bar from CFW (update&themed) HMD-2.0.1
BIG THANKS to HiMedia for provide framework without navigation bar on they Chinese box.
Home screen with navigation bar:
- Backup, backup, backup ALL your data
- Copy backup data to diferent location out side of HiMedia box
- Download disable_android_navigation_bar_(CFW)_HMD-2.0.1.zip
- Rename disable_android_navigation_bar_(CFW)_HMD-2.0.1.zip to update.zip
- Copy update.zip on root of USB flash, don't unpack update.zip
- Follow Setting/Upgrade Menu and choose local upgrade from USB_1
- Wait few seconds for box reboot and Android Nougat rainbow circle will display for seconds
- Box reboot again and enjoy Android Nougat FW without annoying navigation bar.
For restore navigation bar functionality follow restore method with paper clip and this update.zip.
NOT test it, but will need to work with original HiMedia HMD-2.0.1, without problems.
Use at your own risk.
Copy nguyên gốc:
Strip navigation bar from CFW (update&themed) HMD-2.0.1
BIG THANKS to HiMedia for provide framework without navigation bar on they Chinese box.
Home screen with navigation bar:
- Backup, backup, backup ALL your data
- Copy backup data to diferent location out side of HiMedia box
- Download disable_android_navigation_bar_(CFW)_HMD-2.0.1.zip
- Rename disable_android_navigation_bar_(CFW)_HMD-2.0.1.zip to update.zip
- Copy update.zip on root of USB flash, don't unpack update.zip
- Follow Setting/Upgrade Menu and choose local upgrade from USB_1
- Wait few seconds for box reboot and Android Nougat rainbow circle will display for seconds
- Box reboot again and enjoy Android Nougat FW without annoying navigation bar.
For restore navigation bar functionality follow restore method with paper clip and this update.zip.
NOT test it, but will need to work with original HiMedia HMD-2.0.1, without problems.
Use at your own risk.
